1. The working surface for picking up the material must be flush with the bottom of the tool, and the length of the working table can be determined according to the length of the material to be processed.
2. Before starting the machine, it is necessary to check the horizontal steel bar cutting machine to ensure that the installation is correct, the blade has no cracks, the tool holder is fixed with bolts, and the protective cover is firm. Then turn the pulley by hand to check the gear meshing clearance and adjust the section clearance.
3. After the steel bar cutting machine is turned on, dry it first, and confirm that the transmission parts and bearings are working properly before starting to work.
4. If the steel bar cutter does not reach the normal speed, please do not cut the material. Rebar cutting should be carried out after correction. When cutting material, you need to use the middle and bottom of the knife to hold the rebar at the cutting edge and feed it quickly.
5. Do not cut steel bars and red-hot steel bars whose diameter and strength exceed those specified on the mechanical nameplate.
